MTA-MA-013 - Revision history

Monica Hurley: Revision 0 Reviewed by Colton Smith

2026-03-26T17:36:38Z

Revision 0 Reviewed by Colton Smith

← Older revision		Revision as of 17:36, 26 March 2026
Line 1:		Line 1:
	{{DISPLAYTITLE:Turbine-Generator Shaft Torsional Vibration Monitoring Using an RF-Powered Multi-Sensor Module - MTA-MA-013}}		{{DISPLAYTITLE:Turbine-Generator Shaft Torsional Vibration Monitoring Using an RF-Powered Multi-Sensor Module - MTA-MA-013}}
			[[Modernization_Technology_Assessment\| Return to MTA Table]]
	{{MTATemplate\|\|		{{MTATemplate\|\|
	\| Date \|12/15/2020		\| Date \|12/15/2020
Line 7:		Line 8:
	Probabilistic Risk Assessment		Probabilistic Risk Assessment
	\| Reference Implementation Guidance \| Strain-Based Turbine Generator Torsional Vibration Monitoring System – Phase 3: Prototype Field Application (EPRI [https://www.epri.com/research/products/3002006234 3002006234])		\| Reference Implementation Guidance \| Strain-Based Turbine Generator Torsional Vibration Monitoring System – Phase 3: Prototype Field Application (EPRI [https://www.epri.com/research/products/3002006234 3002006234])
	\| Industry SME \| EPRI – ~~Constantin Chitic-Foldi~~		\| Industry SME \| EPRI – P219

	Contact: NuclearPlantMod@epri.com		Contact: NuclearPlantMod@epri.com
	\| Previous Implementation \| Please contact EPRI for implementation examples and contacts.		\| Previous Implementation \| Please contact EPRI for implementation examples and contacts.
	\| Implementation Enablers \| N/A		\| Implementation Enablers \| N/A
	~~\| SWEEP Score \|~~
	* Cost – Level 3 – Implementation costs should be less than $1 million.
	* Savings – Level 1 – Savings are less than $1 million per year.
	* Payback – Level 3 – Torsional vibration testing is required for insurance stipulations. Thus, payback period is immediate compared to alternative OEM methods.
	* Licensing Readiness – Level 3 – The technology has already been implemented at nuclear power plants.
	* Technology readiness – Level 3 – The technology has already been implemented at nuclear power plants to satisfy insurance stipulations. However, TDMS’s ability to detect turbine‑generator failures early requires further research.
	* Implementation proficiency – Level 3 – Technology does not require site‑specific experience related to wireless data infrastructure, wireless data transmission for maintenance and monitoring, or cyber‑security protocols, etc.
	\| Applicability \| All reactor types		\| Applicability \| All reactor types
	All geographic regions		All geographic regions
Line 30:		Line 24:
	Torsional natural frequency testing is part of the loss‑control standards stipulated by insurers, such as Nuclear Electric Insurance Limited (NEIL). The conventional approach to meet insurance standards is to perform a one‑time torsional vibration test. This test is typically achieved by installing special monitoring instrumentation during an outage and then passively monitoring the torsional vibration of the rotor train during the subsequent restart, until the unit reaches full power and rotor train components reach their steady‑state operating temperature. This test can be performed through the turbine original equipment manufacturer (OEM), but cheaper and less invasive testing alternatives exist.		Torsional natural frequency testing is part of the loss‑control standards stipulated by insurers, such as Nuclear Electric Insurance Limited (NEIL). The conventional approach to meet insurance standards is to perform a one‑time torsional vibration test. This test is typically achieved by installing special monitoring instrumentation during an outage and then passively monitoring the torsional vibration of the rotor train during the subsequent restart, until the unit reaches full power and rotor train components reach their steady‑state operating temperature. This test can be performed through the turbine original equipment manufacturer (OEM), but cheaper and less invasive testing alternatives exist.

	This MTA focuses on the EPRI Turbine Dynamics Monitoring System (TDMS), commercially provided by Suprock Technologies: a small, sensitive, and self‑powered (induced power supply) sensor that can monitor torsional strain and shaft surface acceleration during turbine‑generator operation. The TDMS sensor module satisfies the insurance standards for determination of torsional natural frequencies. It is attached through either an epoxy bonding process or a brazing option and is powered by radio‑frequency (RF) transmitters located about one meter from the turbine shaft. The module uses transceivers that continuously measure both strain and acceleration on the turbine shaft and wirelessly transmits data to stationary receivers that capture the data. Data can later be post‑processed by plant personnel and/or the vendor.		This MTA focuses on the EPRI [https://www.epri.com/research/products/3002006234 Turbine Dynamics Monitoring System (TDMS)], commercially provided by Suprock Technologies: a small, sensitive, and self‑powered (induced power supply) sensor that can monitor torsional strain and shaft surface acceleration during turbine‑generator operation. The [https://www.epri.com/research/products/3002006234 TDMS] sensor module satisfies the insurance standards for determination of torsional natural frequencies. It is attached through either an epoxy bonding process or a brazing option and is powered by radio‑frequency (RF) transmitters located about one meter from the turbine shaft. The module uses transceivers that continuously measure both strain and acceleration on the turbine shaft and wirelessly transmits data to stationary receivers that capture the data. Data can later be post‑processed by plant personnel and/or the vendor.

	Since the instrument monitors both strain and acceleration in one sensor module, only one location along the entire rotor train is typically needed to allow monitoring of all critical torsional vibration modes. The module has also been specifically designed with a focus on reducing installation duration and complexity. Combined with only needing installation at one location, this reduces installation time and cost compared to conventional testing approaches. The equipment can be left installed for long‑term continuous monitoring, providing opportunities for enhanced online monitoring in special circumstances. Detection of non‑harmonic excitation from other grid sources is one example. Shaft crack detection and LP last‑stage blade cracking may be detectable through shaft torsional vibration monitoring also, although more research and development is needed to demonstrate these capabilities.		Since the instrument monitors both strain and acceleration in one sensor module, only one location along the entire rotor train is typically needed to allow monitoring of all critical torsional vibration modes. The module has also been specifically designed with a focus on reducing installation duration and complexity. Combined with only needing installation at one location, this reduces installation time and cost compared to conventional testing approaches. The equipment can be left installed for long‑term continuous monitoring, providing opportunities for enhanced online monitoring in special circumstances. Detection of non‑harmonic excitation from other grid sources is one example. Shaft crack detection and LP last‑stage blade cracking may be detectable through shaft torsional vibration monitoring also, although more research and development is needed to demonstrate these capabilities.
Line 36:		Line 30:
	==Benefits==		==Benefits==
	===Benefits Estimate===		===Benefits Estimate===
	Level 1 – Savings are less than $1 million per year and consist of savings compared to alternative torsional vibration monitoring methods. Potential benefits (> Level 1) may be experienced if TDMS aids in successfully avoiding a turbine failure; however, additional research will need to verify TDMS’s early turbine‑failure detection ability related to blade vibration monitoring and shaft crack detection.		Level 1 – Savings are less than $1 million per year and consist of savings compared to alternative torsional vibration monitoring methods. Potential benefits (> Level 1) may be experienced if [https://www.epri.com/research/products/3002006234 TDMS] aids in successfully avoiding a turbine failure; however, additional research will need to verify [https://www.epri.com/research/products/3002006234 TDMS’s] early turbine‑failure detection ability related to blade vibration monitoring and shaft crack detection.

	===Benefits Description===		===Benefits Description===
	* Reduced installation complexity and time leads to cost savings compared to conventional sensor installation.		* Reduced installation complexity and time leads to cost savings compared to conventional sensor installation.
	* The instrumentation has an indefinite life, and therefore could be used to perform torsional testing over the period of several years with one installation. This could be beneficial in cases where sectionalized rotor replacements are being performed across multiple outages.		* The instrumentation has an indefinite life, and therefore could be used to perform torsional testing over the period of several years with one installation. This could be beneficial in cases where sectionalized rotor replacements are being performed across multiple outages.
	* Long‑term continuous monitoring capability provides the ability to identify non‑harmonic excitation from other grid sources that could be potentially damaging. Also, early fault detection (e.g., rotor or blade cracking) may be possible, allowing for avoidance of a catastrophic failure and associated recovery costs (although more research is needed to fully characterize TDMS’s ability in this area).		* Long‑term continuous monitoring capability provides the ability to identify non‑harmonic excitation from other grid sources that could be potentially damaging. Also, early fault detection (e.g., rotor or blade cracking) may be possible, allowing for avoidance of a catastrophic failure and associated recovery costs (although more research is needed to fully characterize [https://www.epri.com/research/products/3002006234 TDMS’s] ability in this area).
	* TDMS has greater sensitivity and frequency resolution compared to alternative test methods. This enables TDMS to more clearly identify low‑amplitude or closely spaced torsional mode frequencies. This is especially useful near the frequency range of concern (2x grid frequency) to be able to differentiate a torsional mode frequency from the always‑present forced response at the 2x grid frequency.		* [https://www.epri.com/research/products/3002006234 TDMS] has greater sensitivity and frequency resolution compared to alternative test methods. This enables [https://www.epri.com/research/products/3002006234 TDMS] to more clearly identify low‑amplitude or closely spaced torsional mode frequencies. This is especially useful near the frequency range of concern (2x grid frequency) to be able to differentiate a torsional mode frequency from the always‑present forced response at the 2x grid frequency.

	==Costs and Schedule==		==Costs and Schedule==
Line 52:		Line 46:

	===Scope Context===		===Scope Context===
	Per unit. The stationary portion of the TDMS equipment can be used between units in a multi‑unit plant.		Per unit. The stationary portion of the [https://www.epri.com/research/products/3002006234 TDMS] equipment can be used between units in a multi‑unit plant.

	==Risks==		==Risks==
	The TDMS ~~system~~ is limited to operation below 250 °F. The technology is typically used with shaft components adjacent to the low‑pressure turbine or generator.		The [https://www.epri.com/research/products/3002006234 TDMS] is limited to operation below 250 °F. The technology is typically used with shaft components adjacent to the low‑pressure turbine or generator.

			==SWEEP Score==
			{\| class="wikitable" style="vertical-align:bottom;"
			\|-
			! Category
			! style="text-align:center; vertical-align:middle;" \| Level
			! Description
			\|-
			\| Cost
			\| style="text-align:center; vertical-align:middle;" \| 3
			\| style="color:#242424;" \| Implementation costs should be less than $1 million.
			\|-
			\| Savings
			\| style="text-align:center; vertical-align:middle;" \| 1
			\| style="color:#242424;" \| Savings are less than $1 million per year.
			\|-
			\| Payback
			\| style="text-align:center; vertical-align:middle;" \| 3
			\| style="color:#242424;" \| Torsional vibration testing is required for insurance stipulations. Thus, payback period is immediate compared to alternative OEM methods.
			\|-
			\| Technical Readiness
			\| style="text-align:center; vertical-align:middle;" \| 3
			\| style="color:#242424;" \| The technology has already been implemented at nuclear power plants to satisfy insurance stipulations. However, [https://www.epri.com/research/products/3002006234 TDMS’s] ability to detect turbine‑generator failures early requires further research.
			\|-
			\| Licensing Readiness
			\| style="text-align:center; vertical-align:middle;" \| 3
			\| style="color:#242424;" \| The technology has already been implemented at nuclear power plants.
			\|-
			\| Implementation Proficiency
			\| style="text-align:center; vertical-align:middle;" \| 3
			\| style="color:#242424;" \| Technology does not require site‑specific experience related to wireless data infrastructure, wireless data transmission for maintenance and monitoring, or cyber‑security protocols, etc.
			\|}

Jacob Sommer: 1 revision imported

2026-03-05T01:37:55Z

1 revision imported

← Older revision	Revision as of 01:37, 5 March 2026
(No difference)

10.142.237.162 at 20:06, 3 March 2026

2026-03-03T20:06:10Z

New page

{{DISPLAYTITLE:Turbine-Generator Shaft Torsional Vibration Monitoring Using an RF-Powered Multi-Sensor Module - MTA-MA-013}}
{{MTATemplate||
| Date |12/15/2020
| Functional Area Where Benefits Will Be Realized | Maintenance
Engineering

Probabilistic Risk Assessment
| Reference Implementation Guidance | Strain-Based Turbine Generator Torsional Vibration Monitoring System – Phase 3: Prototype Field Application (EPRI [https://www.epri.com/research/products/3002006234 3002006234])
| Industry SME | EPRI – Constantin Chitic-Foldi

Contact: NuclearPlantMod@epri.com
| Previous Implementation | Please contact EPRI for implementation examples and contacts.
| Implementation Enablers | N/A
| SWEEP Score |
* Cost – Level 3 – Implementation costs should be less than $1 million.
* Savings – Level 1 – Savings are less than $1 million per year.
* Payback – Level 3 – Torsional vibration testing is required for insurance stipulations. Thus, payback period is immediate compared to alternative OEM methods.
* Licensing Readiness – Level 3 – The technology has already been implemented at nuclear power plants.
* Technology readiness – Level 3 – The technology has already been implemented at nuclear power plants to satisfy insurance stipulations. However, TDMS’s ability to detect turbine‑generator failures early requires further research.
* Implementation proficiency – Level 3 – Technology does not require site‑specific experience related to wireless data infrastructure, wireless data transmission for maintenance and monitoring, or cyber‑security protocols, etc.
| Applicability | All reactor types
All geographic regions
| Keywords | Natural frequencies; shaft torsional vibration; steam turbine generators; strain gage telemetry; torsional testing; turbine blade failure
| Business Case Analysis Cross-Reference | N/A
}}

==Description==
Shaft torsional vibration in power production turbomachinery can be induced by electrical grid transient disturbances and generator negative‑sequence currents. The resulting dynamic torque transmitted to the generator rotor via the air gap can excite torsional vibration modes of the entire shaft system. If severe enough, these vibrations can accumulate fatigue damage in highly stressed rotor elements such as turbine blades, couplings, and generator rotor retaining rings. These torsional vibrations are undetectable by normally installed plant instrumentation (e.g., lateral vibration probes) until later stages of failure. Therefore, if fatigue damage is occurring, it can lead to catastrophic failure without warning or with very short notice.

Torsional natural frequency testing is part of the loss‑control standards stipulated by insurers, such as Nuclear Electric Insurance Limited (NEIL). The conventional approach to meet insurance standards is to perform a one‑time torsional vibration test. This test is typically achieved by installing special monitoring instrumentation during an outage and then passively monitoring the torsional vibration of the rotor train during the subsequent restart, until the unit reaches full power and rotor train components reach their steady‑state operating temperature. This test can be performed through the turbine original equipment manufacturer (OEM), but cheaper and less invasive testing alternatives exist.

This MTA focuses on the EPRI Turbine Dynamics Monitoring System (TDMS), commercially provided by Suprock Technologies: a small, sensitive, and self‑powered (induced power supply) sensor that can monitor torsional strain and shaft surface acceleration during turbine‑generator operation. The TDMS sensor module satisfies the insurance standards for determination of torsional natural frequencies. It is attached through either an epoxy bonding process or a brazing option and is powered by radio‑frequency (RF) transmitters located about one meter from the turbine shaft. The module uses transceivers that continuously measure both strain and acceleration on the turbine shaft and wirelessly transmits data to stationary receivers that capture the data. Data can later be post‑processed by plant personnel and/or the vendor.

Since the instrument monitors both strain and acceleration in one sensor module, only one location along the entire rotor train is typically needed to allow monitoring of all critical torsional vibration modes. The module has also been specifically designed with a focus on reducing installation duration and complexity. Combined with only needing installation at one location, this reduces installation time and cost compared to conventional testing approaches. The equipment can be left installed for long‑term continuous monitoring, providing opportunities for enhanced online monitoring in special circumstances. Detection of non‑harmonic excitation from other grid sources is one example. Shaft crack detection and LP last‑stage blade cracking may be detectable through shaft torsional vibration monitoring also, although more research and development is needed to demonstrate these capabilities.

==Benefits==
===Benefits Estimate===
Level 1 – Savings are less than $1 million per year and consist of savings compared to alternative torsional vibration monitoring methods. Potential benefits (> Level 1) may be experienced if TDMS aids in successfully avoiding a turbine failure; however, additional research will need to verify TDMS’s early turbine‑failure detection ability related to blade vibration monitoring and shaft crack detection.

===Benefits Description===
* Reduced installation complexity and time leads to cost savings compared to conventional sensor installation.
* The instrumentation has an indefinite life, and therefore could be used to perform torsional testing over the period of several years with one installation. This could be beneficial in cases where sectionalized rotor replacements are being performed across multiple outages.
* Long‑term continuous monitoring capability provides the ability to identify non‑harmonic excitation from other grid sources that could be potentially damaging. Also, early fault detection (e.g., rotor or blade cracking) may be possible, allowing for avoidance of a catastrophic failure and associated recovery costs (although more research is needed to fully characterize TDMS’s ability in this area).
* TDMS has greater sensitivity and frequency resolution compared to alternative test methods. This enables TDMS to more clearly identify low‑amplitude or closely spaced torsional mode frequencies. This is especially useful near the frequency range of concern (2x grid frequency) to be able to differentiate a torsional mode frequency from the always‑present forced response at the 2x grid frequency.

==Costs and Schedule==
===Cost===
Level 3 – Implementation costs associated with sensors should be less than $1 million. Costs consist of the sensor module, installation and supporting equipment and are approximately $100,000 per implementation.

===Schedule===
Less than six months, which includes planning and implementation.

===Scope Context===
Per unit. The stationary portion of the TDMS equipment can be used between units in a multi‑unit plant.

==Risks==
The TDMS system is limited to operation below 250 °F. The technology is typically used with shaft components adjacent to the low‑pressure turbine or generator.